AWM1200V

Objednací kód: 25686
Výrobce: Honeywell
Záruční lhůta: 24 měsíců

Máte zájem o tento produkt? Kontaktujte nás:
+420 777 053 000
info@atrolat.cz

Popis produktu
Dokumenty
Technické parametry
Description Take advantage of microbridge mass flow sensor technology. The AWM1000 series mass flow sensor provides all of the outstanding performance benefits of the standard AWM2000 series in a more cost-effective sensor platform. This device provides accurate, repeatable flow sensing. Sensor to sensor interchangeability specifications are approximately twice as large as compared to the AWM2000 series. The heater control circuit and the sensing bridge supply circuit are both required for operation per specification. These two circuits are not on board the sensor and must be supplied in the application. The differential amplifier circuitry may be useful in providing output gain and/or introducing voltage offsets to the sensor output. CAUTION PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor. Failure to comply with these instructions could result in product damage.
Parametr Hodnota
Signal Conditioning Unamplified (mV)
Flow/Pressure Range ±10.0 mbar [4.0 in water]
Output Voltage at Trim Point 20.0 mV dc @ 2.0 in water
Port Style Straight
Series Name AWM1000
Null Shift over Temperature ±0.7 mV dc max.
Output Shift over Temperature ±22 % Reading
Flow Rate Change 5.0 SLPM/s
Repeatability ±1 % Full Scale
Null Offset ±1 mV dc
Response Time 1 ms typ., 3 ms max.
Supply Voltage 8.0 Vdc min., 10.0 Vdc typ., 15.0 Vdc max.
Common Mode Pressure 25 psi
Power Consumption 30 mW typ., 50 mW max.
Operating Temperature -25 °C to 85 °C [-13 °F to 185 °F]
Storage Temperature -40 °C to 90 °C [-40 °F to 194 °F]
Media Compatibility Dry gas only
Sensor Resistance 5.0 kOhm
Sensor Current 0.3 mA typ., 0.6 mA max.
Shock 100 g peak (5 drops, 6 axes)